- Mogami, which became a heavy cruiser by replacing the main gun, reappears with newly designed common parts.
-The product is based on the motif from the beginning of the Pacific War to the Battle of Midway in June 1942.
- A hull cross-sectional shape different from that of Suzuya/Kumano, and the standard portholes at the time of war are prepared with special parts.
-A new mold is used to unify the difference in reproducibility of equipment etc. due to the product release time, and some parts are divided considering the painting work. The molding resolution is improved from 2 parts.
-The 9m cutter is made into 2 parts considering painting, the stand is prepared as a separate part, and it is possible to select a deck integral mold.
- The 12m inner fire lunch can also express the shape without canvas.
- The 11m inner boat has separate parts for the canvas and the wheelhouse/machine room canopy for painting.
- Specifications to perform each painting and assembly and adhesion later.
- The carrier-mounted boat mount is molded to express unevenness and light holes, giving it a more precise shape.
- New chrysanthemum crest on bow.
- New port lights and lifebuoys.
- The former is for unifying the size of each ship, and the latter is for additional representation of the omitted parts.
- Added stern ship name notation (warship color fill color) and mast white line decals.
- The 96-type 25mm machine gun is a standard specification with a 2-part configuration that reduces painting / painting work.
[Hull structure]
・Mogami and Mikuma's hulls, which have a wide angle of inclination on the middle deck level, are reproduced with special parts.
- Reproduce the appearance of unblocked portholes different from aircraft cruiser Mogami.
・The external cable circuit is molded integrally with the hull, expressing individual differences such as the difference in the position near the stern and the high position in the center.
・The width of the ship near the shelter deck is 1.0mm (on the model) wider than that of Suzuya/Kumano.
[bridge/forward mast]
-The front mast is exclusive to Mogami/Mikuma and reproduces the height difference (slightly lower) from Suzuya.
-Reproduce the attitude observatory equipped with the Type 92 torpedo launch command device, which is a feature at the time of the war.
- The bridge window is prepared with transparent parts that can be finished more realistically.
- The air defense command post and the Rashinkanbashi floor are recreated with delicate engravings.
・Dedicated parts are used to reproduce the can room air inlets on both sides of the bridge, which only Mogami/Mikuma exists.
[Chimney/air inlet/linoleum deck]
-The entrance on the deck is designed to reduce complexity by avoiding coloring as much as possible for the height of the hatch, with only the height direction being understated.
・For the Mogami/Mikuma, the 12 canisters have a thick chimney at the front that splits into two.
・Funnel cap is a molded part with [missing state].
-The steam waste pipe is a separate part that is designed to increase precision and is a dedicated part for Mogami/Mikuma.
・Mogami/Mikuma has a small air intake in the can room under the chimney, and the difference from Suzuya is expressed with special parts.
-The machine gun seat next to the chimney has special parts to express Mogami/Mikuma's unique outline shape.
・The air supply port is arranged in a V shape behind the chimney (under the searchlight), which is a feature of Mogami/Mikuma only.
・For the linoleum deck, special parts are prepared because the layout of the vents and equipment is different from the Suzuya/Kumano.
[High-angle turret/antenna strut]
・The 12.7 cm twin high-angle gun seat is a Mogami/Mikuma exclusive part, and the back side of the seat has a flat shape.
-The antenna struts installed on the canopy of the 3rd/4th main turret are dedicated parts that reproduce the unique shape of each ship.
[rear mast/rear bridge/crane]
・The top of the rear mast is slanted backwards and uses special Y-shaped parts for Mogami/Mikuma.
-The water reconnaissance crane has a slide mold on the side and top to reproduce light holes, and the hook is also expressed with delicate modeling.
-The rear bridge has special parts that reproduce the small and multiple air supply ports on the sides that are unique to Mogami/Mikuma.
[Shelter deck/Air work deck]
・The shelter part equipped with the torpedo tube is three-dimensionalized based on the official drawing, including the spare torpedo storage.
- Catapult (Kure type No. 2 type 5) realistically reproduces the side / top modeling with a slide mold.
[Ship-based aircraft]
・The molding color is gray to improve workability (prevent damage when cutting the gate).
- 1 Type-0 (three-seat) water reconnaissance plane and 2 Type 95 water reconnaissance planes are included.
[Attached decal]
・Markings such as warship flags, national flags, and Hinomaru of shipboard aircraft are included.
( This is a machine translation. Please allow for possible misinterpretations in the text. )